1. We need to pay attention to the problem of chemical agents. We need to prepare 70% phosphoric acid, and we also need to add 3% nitric acid and sulfuric acid internally. After the ratio is completed, we need to stir continuously until it is completely mixed. It might as well be processed.
2. It is necessary to pay attention to the polishing environment, which should be carried out in a clean state, otherwise it is easy to cause rust problems after chemical spraying. Only in a clean environment can this problem be avoided.
3. Pay attention to the operation process and be sure to comply with the requirements for handling. Workers, especially, need to wear protective equipment to avoid affecting their own safety.
4. Pay attention to the inspection after use. After the 6061 aluminum plate is polished, it needs to be inspected to avoid missing parts and ensure that every place has been processed before placement.
-, Characteristics and applications of 6061 aluminum alloy
6061 aluminum alloy is a medium-strength aluminum alloy with good plasticity, workability, electrical conductivity and corrosion resistance. Its main alloying elements are magnesium and silicon, which have high mechanical properties after heat treatment.
6061 aluminum alloy is widely used in aviation, aerospace, automobiles, electronics, construction and other fields.
Introduction to magnetic polishing technology
Magnetic polishing technology uses the magnetic force of magnetic materials in the magnetic field to cause relative movement between the polishing tool and the workpiece to achieve the purpose of polishing. Magnetic polishing has the following advantages.
1. High efficiency: Magnetic polishing has fast speed and high polishing efficiency, and is suitable for mass production.
2. Environmental protection: Magnetic polishing uses water-based polishing fluid, which has little environmental pollution.
3. Low cost: impact polishing equipment has low investment and maintenance costs, reducing production costs.
4. Good polishing effect: Magnetic polishing can achieve uniform and smooth polishing effect.
3. Application of magnetic polishing of 6061 aluminum alloy
1. Aluminum alloy parts processing: Magnetic polishing technology can be applied to the processing of aluminum alloy parts to improve the surface finish of the parts and reduce processing costs. 2. Aluminum alloy mold polishing: Magnetic polishing technology is suitable for polishing aluminum alloy molds, improving the surface quality of the mold and extending the service life of the mold. 3. Aluminum alloy decorative parts polishing: Magnetic polishing technology can be used for polishing aluminum alloy decorative parts. Improve the aesthetics of decorative parts.
4. Conclusion
6061 aluminum alloy magnetic polishing technology has broad application prospects in aluminum alloy production. With the continuous development and improvement of magnetic polishing technology, its application in the aluminum alloy industry will be more extensive, contributing to the technological progress and green development of my country's aluminum alloy industry.
