GNEE Aluminum supplied 541 sheets (10.18 tons) of 3003-H24 aluminum tread plate to Vietnam, specified for anti-slip flooring for vehicle decks, truck beds, stairs, walkways and light industrial platforms. The order was delivered with EN 10204 3.1 MTC and full export documentation.
GNEE Aluminum has successfully completed another export order of 3003-H24 aluminum tread plate for an industrial buyer in Vietnam. The material was specified for anti-slip flooring for vehicle decks, truck beds, stairs, walkways and light industrial platforms, where long-term reliability, dimensional accuracy and certified quality were the customer's primary concerns. This shipment continues GNEE's track record of supplying aluminum tread plate to industrial buyers across Southeast Asia, and shows the company's ability to meet order-specific dimensions, tempers and inspection requirements without compromising delivery time.
Vietnam is a fast-growing market for electronics, construction and processing. Buyers in this market typically require compliance with ASTM B209 / EN 485 / EN 573 specifications, full material traceability, tight dimensional accuracy, and third-party inspection documentation. For anti-slip flooring for vehicle decks, truck beds, stairs, walkways and light industrial platforms, local fabricators and end-users look for suppliers who can provide both standard stock sizes and engineered lengths, supported by mill test certificates accepted by international inspectors.
Customer Technical Requirements
During the technical evaluation, the Vietnam customer submitted detailed dimensions and requested inspection procedures aligned with ASTM B209 / EN 485 / EN 573 to ensure service reliability. GNEE's technical team confirmed alloy, temper and tolerances against the application conditions, and agreed on the inspection plan, surface condition and packing method before the order entered production. Any deviation from the agreed specification was resolved with the customer in advance.
For anti-slip flooring for vehicle decks, truck beds, stairs, walkways and light industrial platforms, the selected 3003-H24 aluminum tread plate delivers the properties the application demands. Good corrosion resistance and formability, moderate strength. In service, the material must keep its properties under the operating environment while holding dimensional stability during machining, welding or forming. GNEE's technical team reviewed the customer's drawing and operating conditions, then confirmed the alloy, temper and tolerance class before production, so the supplied lot matched the downstream process without rework.
Order Specification
| Product | 3003-H24 aluminum tread plate |
|---|---|
| Alloy | 3003 (3xxx Al-Mn) |
| Temper | H24 |
| Standard | ASTM B209 / EN 485 / EN 573 |
| Dimensions | 2.2mm x 1000mm x 2400mm x 285 sheets + 2.2mm x 1500mm x 2400mm x 256 sheets (small five-bar pattern) |
| Order Quantity | 541 sheets (10.18 tons) |
| Surface Finish | mill finish |
| Destination | Vietnam |
| Lead Time | 15-30 days after order confirmation |
| MTC | EN 10204 3.1 mill test certificate (3.2 and third-party inspection available on request) |
Quality Control
Every aluminum tread plate in this order was produced and inspected under GNEE's standard quality system, from incoming ingot verification to final dimensional and visual checks. Mill test certificates to EN 10204 3.1 are provided with the shipment; 3.2 certificates and third-party inspection (such as SGS or BV) can be arranged on request. The inspection items below were applied to this lot and recorded in the corresponding mill test report.
Ultrasonic test (UT) per ASTM B594 - Detects internal laminations in plate that could fail under load or forming.
Tensile test (per MTC) - Confirms the plate meets the mechanical properties of the ordered temper.
Flatness & thickness gauge - Checks thickness tolerance and flatness so the plate welds and cuts without distortion.
Visual & edge inspection - Verifies edge quality and surface condition for welding and fabrication readiness.
Bend test for formable tempers - For formable tempers, confirms the material bends without cracking.
Export Packaging for Safe Delivery to Vietnam
For the delivery to Vietnam, the aluminum tread plate was packed with seaworthy export materials - protected with interleaving paper / PVC and bound on strong wooden or steel pallets, with end caps and moisture-proof wrapping as required. Each bundle was labelled with heat number, dimensions and net / gross weight. Packing lists, commercial invoice, bill of lading and the EN 10204 3.1 MTC were prepared for smooth customs clearance, and packing photos can be shared before container loading.
Available Sizes from GNEE
In addition to the ordered dimensions above, GNEE supplies aluminum tread plate in the standard ranges listed below. Custom sizes can be produced to customer drawing - share your required alloy, temper and dimensions for a quotation.
| Dimension type | Typical range | Tolerance standard |
|---|---|---|
| Thickness (sheet) | 0.5 – 6 mm | EN 485-2 / ASTM B209 |
| Thickness (plate) | 6 – 200 mm | EN 485-2 / ASTM B209 |
| Width | up to 2600 mm | ± width class per EN 485 |
| Length | up to 12000 mm | ± length class per EN 485 |
| Tread / checkered plate | 1.5 – 10 mm × 1000 – 2000 mm | EN 1386 |
| Flatness | per EN 485 flatness class | EN 485-3 |
About GNEE
GNEE Aluminum exports aluminum products to 100+ countries and regions. Common sizes and tempers are kept in stock; both large and small orders are accepted; technical team assists alloy and temper selection by service condition. Standard and custom dimensions can be produced to drawing for fast turnaround. Typical lead time is 15-30 days. Every shipment is backed by EN 10204 3.1 mill test certificate (3.2 and third-party inspection available on request), and the technical team supports alloy selection, tolerance definition and inspection planning for each order.
Frequently Asked Questions
What standard and certificate apply to 3003-H24 aluminum tread plate?
This product is supplied to ASTM B209 and EN 485 / EN 573, with an EN 10204 3.1 mill test certificate. Third-party inspection and 3.2 certificates can be arranged on request.
What is the typical lead time and minimum order quantity?
Standard lead time is 15-30 days after order confirmation. MOQ flexible / small orders acceptable - both trial and volume orders are accepted.
Can GNEE supply 3003-H24 aluminum tread plate to Vietnam?
Yes. GNEE supplies eligible end-users and compliant destinations only. Export documents are prepared for smooth customs clearance.
Do you supply other sizes of aluminum tread plate besides the ordered dimensions?
Yes. Besides the lot described above, GNEE keeps a range of standard sizes in stock and can produce custom dimensions to drawing. The typical supply range for aluminum tread plate is listed in the Available Sizes section of this page. Tell us your required alloy, temper and dimensions for a quotation.
