8006 aluminum foil has high strength, good formability and ductility, and good corrosion resistance. It is increasingly used in food and household packaging foil, beer industry foil, pharmaceutical industry foil, tape foil, etc.
8006 aluminum foil is a special aluminum alloy for container foil products. GNEE 8006 aluminum foil adopts hot rolling method, and its tensile strength is between 123-135 MPa. 8006 aluminum foil products reach paint grade A, and the surface is very smooth, clean, and free of oil stains. GNEE 8006 aluminum foil is particularly suitable for aerospace anti-wrinkle lunch boxes. There are no wrinkles on the edges after stamping, and the appearance is flat and smooth.
GNEE 8006 aluminum foil strength
Technology: Top polishing technology, guaranteeing good gloss and smooth surface.
Markets: Gain market share around the world.
Equipment: Advanced cutting lines, available in a variety of specifications.
Responsibilities: Engage in charitable donations and provide environmentally friendly products.
The difference between 8006 aluminum foil, 3003 aluminum foil and 8011 aluminum foil:
1. 8006 lunch box aluminum foil has higher strength; the material is hot rolled.
2. The strength of 3003 aluminum foil and 8011 aluminum foil is low, and the materials are cold cast.
3. The elongation rate and cupping value of 8006 aluminum foil are higher than those of 8011 and 3003 lunch box aluminum foil.
4. The tensile strength of 8006 container foil is 10MPa higher than that of 8011 aluminum foil, and slightly lower than that of 3003 aluminum foil.
Technical Parameter of 8006 Aluminum Foil
| Ingredient | Cu | Mg | Mn | Fe | Si | Zn | Cr | Other | Al |
| Content | ≤0.30 | ≤0.10 | 0.30~1.0 | 1.2~2.0 | ≤0.40 | ≤0.10 | – | 0.15 | Margin |
| Alloy Type | >8006 aluminium foil | ||||||||
| Alloy State | >O, H14, H16, H18, H19, H22, H24, H26, H28 | ||||||||
| Thickness (mm) | >0.014-0.2 | ||||||||
| Width (mm) | >100-1500 | ||||||||
| Length | >Jumbo roll | ||||||||
