Aluminum foil specification thickness reference
Countries around the world have different regulations on the maximum thickness of aluminum foil, such as the United States 0.15mm (5.91 mils), Japan 0.20mm (7.87 mils), Germany 0.20mm (7.87 mils), 0.15mm (5.91 mils), and the United Kingdom 0.20 mm (7.87 mils). , France is 0.20 mm (7.87 mils), Italy is 0.05 mm (1.97 mils), Sweden is 0.04 mm (1.57 mils), and the former Soviet Union is 0.04 mm (1.57 mils). It is 0.20 mm (7.87 mils), in our country it is 0.20 mm (7.87 mils).
Aluminum foil is generally supplied in roll form, and the diameter of the aluminum foil roll is generally 180-230mm.

At present, the industrial aluminum foil produced in my country mainly has 4 widths and 18 different thicknesses. This series of products is introduced as follows.
(1) Aluminum foil width range: 10~39mm, 39~130mm, 130~220mm, 220~600mm, etc. 4 types.
(2) Aluminum foil thickness: 0.005mm (0.20 mils), 0.0075mm (0.30 mils), 0.010mm (0.40 mils), 0.012mm (0.47 mils), 0.014mm (0.55 mils), 0.016mm (0.63 mils), 0.020 mm (0.79 mil), 0.025 mm (0.98 mil), 0.030 mm (1.18 mil), 0.040 mm (1.57 mil), 0.050 mm (1.97 mil), 0.060 mm (2.36 mil), 0.070 mm (2.76 mil), 0.080 mm (3.15 mil), 0.100 mm (3.94 mil), 0.120 mm (4.72 mil), 0.150 mm (5.91 mil), 0.200 mm (7.87 mil) 18 types.

Aluminum foil production process
Aluminum foil is rolled, and the roller is always in an elastic flattening state.
During the rolling process, the thickness of the foil can be controlled by adjusting the rolling force, rolling speed and controlling the tension.
During the rough rolling process, the thickness of the foil is controlled by the rolling force; during the finishing rolling process, the thickness of the foil decreases as the rolling speed increases; Conditional yield strength σ0.2~0.4
During low-speed rolling, heavy oil or thin oil is often added to the lubricating oil to adjust the rolling thickness of the aluminum foil. Lubricant and roll conditions have a very important impact on aluminum foil quality.









