HENAN GNEE NEW MATERIAL CO., LTD
86-372-5055135
Contact Us
  • Contact Us
  • Tel: +86-372-5055135
  • Mob: +8615824687445
  • Email: sales@gneealu.com
  • Whatsapp: +86 15824687445
  • Add: No.4-1114, Beichen Building, Beicang Town, Beichen District, Tianjin, China

5083 H116 Aluminum Plate Price in November 2026: SMM Base Slips, Marine Premium Holds

Nov 20, 2026

Looking for 5083 H116 aluminum plate for a hull skin, a deck house, a tank shell or a batch of flange blanks? Through November the SMM aluminum base slid while the conversion premium for marine-grade plate held steady, so most of the month's saving came from the metal. This page gives the current per-ton figures in CNY and USD, the H116 properties behind the price, and the stock sizes we can ship against a drawing.

 

On November 18 the SMM A00 aluminum base settled at 22,540 CNY/t (about 3,379 USD/t), down 980 CNY/t (-4.2%) from 23,520 CNY/t on November 2 and the lowest close of the month. Listings for 5083-H116 plate followed the base down into a 29,470–30,700 CNY/t band, while the rolling and stabilising premium stayed in the same range it has held all autumn.

 

For a firm 5083 H116 aluminum plate price, send the thickness, width, length and quantity.

Ask for a quote with your plate list and the metal element is fixed against the SMM quote on the order date.

What is 5083 H116 aluminum plate?

5083 H116 aluminum plate is a flat-rolled Al-Mg-Mn product, supplied to ASTM B209 or EN 485-2 with composition per EN 573-3. The H116 temper is strain hardened and then stabilised so the plate resists exfoliation corrosion in continuous seawater service - the reason classification drawings call for it on hull plating and wet decks. In European supply documents the same material appears as aluminium 5083 H116 or AlMg4.5Mn0.7. Plate is delivered with a mill finish and can be filmed where it will be machined after arrival.

 

5083 H116 aluminum properties: composition and mechanical data

Buyers compare 5083 H116 aluminum properties on three things: what the alloy contains, what strength the temper guarantees, and how it behaves after welding. The two tables below give the specification values used on mill certificates.

 

Chemical composition of 5083 H116 aluminum plate (wt.%)

Element Specification range Element Specification range
Magnesium (Mg) 4.0 – 4.9% Iron (Fe) ≤ 0.40%
Manganese (Mn) 0.4 – 1.0% Silicon (Si) ≤ 0.40%
Chromium (Cr) 0.05 – 0.25% Copper (Cu) ≤ 0.10%
Aluminum (Al) Remainder Zinc (Zn) ≤ 0.25%

Copper is held low to protect seawater corrosion resistance. The certificate reports the heat analysis against EN 573-3.

 

Mechanical properties of H116 aluminum plate versus other tempers

Temper and gauge Tensile strength (MPa) Proof strength (MPa) Elongation (%)
H116 plate up to 12.7 mm ≥ 305 ≥ 215 ≥ 10
H321 plate up to 12.7 mm 305 – 380 215 – 295 ≥ 10
H111 plate 6.3 – 12.5 mm 270 – 345 ≥ 115 ≥ 16
H111 plate 12.5 – 50 mm 270 – 345 ≥ 115 ≥ 15

Values are EN 485-2 minimums or ranges for the stated gauge; the mill certificate governs the delivered lot. Density is 2.66 g/cm³. H116 and H321 sit in the same strength class, while H111 trades proof strength for forming ductility. All 5xxx plate loses work hardening in the weld zone, so size the load path on annealed strength at the weld.

 

What is the difference between H116 and H111 aluminum plate?

H116 adds a stabilising treatment and a guaranteed exfoliation-corrosion result for seawater, which is why it carries a higher conversion premium. H111 is only lightly work hardened, so it forms more easily and is chosen for deep-formed panels and tank shells where a seawater rating is not required. The strength gap is measurable: 215 MPa minimum proof strength for H116 against 115 MPa for H111, with elongation moving from 10% to 15–16% in the other direction. Pick the temper from the drawing, then price it.

 

5083 H116 aluminum plate price in November 2026 (CNY and USD per ton)

The table collects supplier listings for 5083-H116 plate seen during November 2026. These are China domestic reference figures for named sizes and are not confirmed export quotations.

Alloy and temper Size (mm) Price (CNY/t) Price (USD/t)
5083-H116 plate 5 × 2000 × 6000 30,300 4,543
5083-H116 plate 12 × 2000 × 8000 29,870 4,478
5083-H116 plate 20 × 2000 × 8000 29,470 4,418
5083-H116 plate 35 × 2000 × 6000 30,700 4,603
5083 plate, general market average, mid-November 27,970 – 28,070 4,193 – 4,208

The spread between H116 listings and the general 5083 market average is the conversion premium: rolling to thickness, the stabilising treatment, straightening, and the mill certificate. Thicker and wider plate costs more per ton because fewer pieces come out of a heat and the rolling schedule takes longer.

 

Conversion note: USD figures use USD/CNY 6.67 on November 20, 2026 and are rounded to the nearest dollar. They are given for comparison only - a contract in USD is converted at the exchange rate on the contract date, so the settled amount can differ from the figures shown here. RMB figures include 13% VAT; the VAT-excluded equivalent is roughly the RMB figure divided by 1.13. Freight, inspection beyond the mill certificate and the trade term are additional.

 

SMM A00 aluminum base through November

The chart plots the SMM A00 aluminum base for every trading day from November 2 to November 18. The month opened near 23,500 CNY/t, peaked at 23,540 CNY/t on November 9, then fell 600 CNY/t in a single session on November 11. A partial rebound on November 12 was given back in the second half of the month, and the base closed at its low of 22,540 CNY/t on November 18.

 

SMM A00 aluminum base through November

 

Date SMM A00 (CNY/t) SMM A00 (USD/t) Day change (CNY/t)
Nov 2 23,520 3,526 -260
Nov 3 23,450 3,516 -70
Nov 4 23,350 3,501 -100
Nov 5 23,380 3,505 +30
Nov 6 23,340 3,499 -40
Nov 9 23,540 3,529 +200
Nov 10 23,290 3,492 -250
Nov 11 22,690 3,402 -600
Nov 12 23,120 3,466 +430
Nov 13 23,130 3,468 +10
Nov 16 22,960 3,442 -170
Nov 17 22,870 3,429 -90
Nov 18 22,540 3,379 -330

Two things matter for a plate buyer in this line. The month high and low were 1,000 CNY/t apart, so the date you fix the metal changes the invoice more than a small change in gauge. Single sessions also moved as much as 600 CNY/t; a quotation held over several days needs the order date written on it.

 

How the 5083 H116 aluminum plate premium moved

The general 5083 plate market average was 28,070 CNY/t on November 13 and 27,970 CNY/t on November 16, a fall of 100 CNY/t. Over the same two sessions the SMM base dropped 170 CNY/t. Plate came down less than metal, which widened the rolling and certification premium slightly.

 

H116 listings stayed in a 29,470–30,700 CNY/t band across the month. The stabilising treatment and the seawater exfoliation-corrosion guarantee sit inside that premium, so the figure does not move with every metal tick. When you compare two quotes, separate the SMM base from the conversion figure so the two offers are judged on the same terms.

 

5083 H116 Aluminum Plate Specification

A 5083 H116 sheet and a thicker H116 plate are supplied to the same temper and certificate. Standard stock widths and the thickness range are listed below; gauges outside the common band are produced to order.

Product Name: Aluminum Plate
Standard: ASTM, BS, DIN, GB, JIS
Grade: 5083
Common Trade Names UNS A95083, ISO AlMg4.5Mn, AA5083-H111, Al5083-H111, AA5083-H116, Al5083-H116, AA5083-H131, Al5083-H131
Length: 2000mm-6000mm or as required
Width: 10000-2000mm or as required
Thickness:

Cold rolled: 0.15mm-10mm or as required

Hot rolled: 3.0mm-180mm or as required

Surface: Mill, Embossed, Checkered, Bright, Polished, Brush, Sand Blast, etc.
Payment Terms: T/T L/C, Western Union etc.
Delivery time: 5-15days and Depend on Customer&primes Order
Certificate DNV, NK, CCS, ABS, BV, LR
Package: In standard export package, wooden pallets or as required
Container size:

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM

40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM

 

Common sheet sizes: 1220 × 2440 mm and 1500 × 3000 mm.

Tolerance: thickness, width and flatness to EN 485-4; state the governing standard on the order.

Processing: sawing, cut-to-size, edge milling and protective film against the drawing.

The size range is indicative. Confirm the exact thickness, width and temper with the supplier before you release a drawing, and allow machining stock where the plate is cut or welded after arrival.

 

Weight and metal value of 5083 H116 aluminum plate

At a density of 2.66 g/cm³, plate weight follows weight (kg) = thickness (mm) × width (m) × length (m) × 2.66. For a 20 mm × 2000 mm × 8000 mm plate that is 851.2 kg. At the November H116 listing of 29,470 CNY/t, the metal value is about 25,085 CNY, or roughly 3,761 USD at 6.67.

Weight drives the freight as well as the invoice, so ask for the weight per piece on the quotation when you compare two thicknesses.

 

5083 H116 aluminum plate

 

Applications of 5083 H116 aluminum plate

Hull plating, bottom shells and wet-deck plating where the H116 seawater rating is called up by the class drawing.

Deckhouses, superstructures and structural frames where H321 stabilisation is specified.

LNG tank liners and cryogenic vessels, where 5083 keeps notch toughness at low temperature.

Chemical and storage tanks welded from H111 plate, where deep forming and weld ductility come first.

Truck bodies, trailer panels and marine partitions that need corrosion resistance at low weight.

 

Inspection and testing of 5083 H116 aluminum plate

Each lot is checked for thickness, width, length and flatness, with composition and tensile results recorded on the mill test certificate. Third-party inspection by SGS, BV or TÜV, and class-society survey for marine plate, can be arranged where the contract calls for it.

 

Inspection and testing of 5083 H116 aluminum plate

 

Packaging of 5083 H116 aluminum plate for export

Plate is stacked on timber pallets, separated by spacers, wrapped against moisture and strapped for the sea leg. Edges are protected and each bundle is marked with alloy, temper, size and heat number so the pieces sort against the order list on arrival.

 

news-720-632

 

About GNEE

Established in 2008, exporting aluminum products to 100+ countries and regions.

Plate, sheet, coil, strip, foil, bar, tube and fabricated parts from one source, so a mixed order leaves on one set of documents.

In-house sawing, cut-to-size, edge milling and protective filming against the order drawing.

Export packing and documents prepared for the destination port, including certificates of origin where the buyer needs them.

 

Request a quote for 5083 H116 aluminum plate

Send the thickness, width, length, quantity and destination port.

Ask for a quote with your 5083 H116 aluminum plate list

Quotations are benchmarked to SMM, with the metal element confirmed against the SMM A00 quote on the order date. MOQ is flexible - small trial orders and large-volume orders, full container loads and long-term contracts are all accepted. Lead time is 15–30 days. An EN 10204 3.1 mill test certificate comes with each order, and FOB or CIF terms with T/T or L/C payment are available. Enquiries are answered within 24 hours.

 

FAQ

Q: What is the 5083 H116 aluminum plate price per ton in November 2026?

A: Supplier listings run 29,470–30,700 CNY/t (about 4,418–4,603 USD/t) by thickness and size, on an SMM A00 base of 22,540 CNY/t on November 18. Confirm against the quote on your order date.

 

Q: What does the H116 temper mean on 5083 aluminum plate?

A: H116 is strain hardened and stabilised to resist exfoliation corrosion in seawater. EN 485-2 gives it a minimum tensile strength of 305 MPa and proof strength of 215 MPa up to 12.7 mm.

 

Q: Is 5083 H116 sheet available in stock sizes?

A: Common widths of 1220, 1250, 1500, 2000, 2200 and 2500 mm are supplied, in thicknesses from 0.3 to 200 mm. Non-standard gauges and cut-to-size pieces are produced to order.

 

Q: What is the difference between H116 and H111 aluminum plate?

A: H116 is stabilised for seawater and guarantees an exfoliation-corrosion result; H111 is lightly work hardened and forms more easily. Proof strength runs 215 MPa for H116 against 115 MPa for H111.

 

Q: How much does a 20 mm 5083 H116 aluminum plate weigh?

A: A 20 mm × 2000 mm × 8000 mm plate weighs 851.2 kg at 2.66 g/cm³. At 29,470 CNY/t that is about 25,085 CNY, roughly 3,761 USD at 6.67.

 

Q: Which standard covers 5083 H116 plate?

A: Flat rolled 5083 plate is covered by ASTM B209 and EN 485-2, composition per EN 573-3, with GB/T 3880 available. The certificate names the standard on the order.