1. What are the knowledge points about using aluminum coils?
1. Aluminum coil bending: When bending the edge, the stress is uniform and formed once. Do not bend repeatedly, otherwise the aluminum coil will break.
2. Aluminum coil storage: It should be stored in a dry and ventilated place and placed flat on the surface without stepping on it.
3. Aluminum coil handling: All sides of the plate should be lifted at the same time to avoid scratching the surface of the plate.
4. Aluminum coil cutting grooves: When cutting grooves with a slotting machine or gong machine, a semicircle head milling cutter should be used. The 0.2-0.3 mm thick plastic core should be bent together with the aluminum coil to increase strength and toughness, otherwise the aluminum coil may break or the paint film may crack when it is bent.
5. Aluminum coil arc processing: Special bending equipment should be used for arc processing, so that the plate gradually reaches the required surface and cannot be bent at one time.

6. Aluminum coil batches: Aluminum coils of the same type and different batches may have color differences. When selling and using different batches of paper, color difference comparison procedures should be added. Our company mainly deals in alloy aluminum coils, aluminum pattern plates, etc., which can only be used on the same plane without visual color difference.
7. Installation direction of aluminum coils: When installing aluminum coils of the same color on the same plane, the flow direction must be consistent, otherwise visual color difference will occur.
8. Tear off the film from the aluminum coil: Tear off the protective film within 45 days after the aluminum coil is installed, otherwise it will be difficult to peel off the film or the glue will transfer.
9. Conditions for use of aluminum coils: Indoor wall panels should be used indoors and cannot be installed outdoors to ensure the use effect and service life.
2. Advantages of using aluminum coils
1. Aluminum and aluminum alloys have low density and high strength. After a certain degree of cold working, the strength can be strengthened, and some brands of aluminum alloys can also be strengthened through heat treatment.
2. Good electrical and thermal conductivity.
Aluminum is second only to silver, copper and gold.
3. The coating is uniform and comes in various colors.
Advanced electrostatic spraying technology enables uniform adhesion between paint and aluminum coils, with various colors and a large selection space.
4. Easy to process. Adding certain alloy elements can obtain good casting properties. Cast aluminum alloy or good processing plastics. With good technology and pre-painting processing technology, the aluminum coil can be processed into a flat surface. Complex geometric shapes such as arcs and spheres. Aluminum coils are formed in the factory, production does not require cutting, and can be directly processed twice. Many Xuzhou aluminum coil manufacturers will pay attention to this.

5. Good corrosion resistance.
The surface of aluminum can easily and naturally produce a dense protective film of AL2O3, which can well protect the substrate from corrosion. Cast aluminum alloy with good casting performance or deformed aluminum alloy with good processing shape.







