1050 H24 Aluminum Sheet Overview
If you are looking for a high-purity aluminum sheet with excellent formability and corrosion resistance, the GNEE 1050 H24 aluminum sheet is a proven solution for industrial and commercial applications. Contact GNEE today to request technical details, pricing, or customized dimensions for your project.
The 1050 aluminum alloy is produced from industrial pure aluminum with trace additions of copper, resulting in an aluminum content of 99.5%.
In the H24 temper, the alloy is strain-hardened and then partially annealed, giving it a strength level between annealed (O) and full-hard (H28). This temper delivers moderate strength while maintaining excellent ductility and surface quality.
1050 H24 Aluminum Sheet Material Characteristics
The 1050 H24 aluminum sheet combines the inherent properties of pure aluminum with stable mechanical performance:
Low strength, but excellent formability
Outstanding surface treatment performance, ideal for anodizing
Very good weldability, suitable for contact welding and gas welding
Excellent corrosion resistance, even in humid or mild chemical environments
High electrical and thermal conductivity, typical of 1000-series aluminum
As aluminum purity increases, hardness decreases. Within the 1000 series, 1050 aluminum has slightly higher strength than lower-purity grades and is very close in performance to 1060 aluminum.
1050 H24 Aluminum Sheet Anodizing and Surface Performance
The anodized surface of 1050 H24 aluminum sheet and coil offers a bright, visually appealing finish. Anodizing significantly enhances corrosion resistance and reflectivity, making the material suitable for decorative and functional applications requiring a clean, uniform appearance.
1050 H24 Aluminum Sheet Weldability and Conductivity
One of the major advantages of 1050 H24 aluminum plate is its excellent weldability. It can be welded using multiple techniques, including:
Gas welding
Arc welding
Resistance welding
Additionally, the presence of trace iron (Fe) helps maintain high electrical conductivity, making this alloy suitable for conductive and heat-transfer components.
Mechanical Properties of 1050 H24 Aluminum Sheet
| Property | Typical Value |
|---|---|
| Tensile Strength (σb) | 95–125 MPa |
| Yield Strength (σ0.2) | ≥ 75 MPa |
| Hardness | Low |
| Formability | Excellent |
These properties make 1050 H24 aluminum sheet ideal for forming, bending, stamping, and light structural applications where strength requirements are moderate.
Chemical Composition of 1050 H24 Aluminum Sheet
| Element | Content (%) |
|---|---|
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.05 |
| Titanium (Ti) | ≤ 0.03 |
| Others (each) | ≤ 0.03 |
| Aluminum (Al) | ≥ 99.50 |
Applications of 1050 H24 Aluminum Sheet
Due to their balanced properties, 1050 H24 aluminum sheets and plates are widely used in:
- Lighting fixtures and reflective plates
- Chemical industry tanks and containers
- Heat exchangers and cooling components
- Signage, nameplates, and decorative panels
- General sheet metal parts requiring moderate strength
Aluminum's lightweight yet durable nature also makes it suitable for transportation systems, including rail components and aerospace structures, where corrosion resistance and weight reduction are critical.
Comparison: 1050 H24 Aluminum Sheet vs 3003 Aluminum Sheet
While 1050 H24 aluminum sheet is valued for purity and conductivity, 3003 aluminum alloy contains manganese as its main alloying element, providing moderate strength and excellent corrosion resistance. Unlike 1050, 3003 aluminum offers better machinability and is commonly used in pressure vessels, ductwork, heat exchangers, fuel tanks, and general fabrication.
Available Forms and Specifications of 1050 H24 Aluminum Sheet
| Item | Specification |
|---|---|
| Product Forms | Sheet, Plate, Coil |
| Available Tempers | O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114, F |
| Thickness | 0.2 – 600 mm |
| Width | 100–2650 mm |
| Length | Customized |
Why Choose GNEE 1050 H24 Aluminum Sheet
GNEE supplies 1050 H24 aluminum sheet, plate, and coil with consistent quality, precise tolerances, and reliable performance for industrial applications. Our products meet international standards and support both large-scale manufacturing and customized requirements.
To explore how 1050 H24 aluminum sheet from GNEE can enhance your next project, get in touch with our technical team today for expert guidance and competitive supply solutions.
