1050 Aluminum Sheet Overview
When your application demands high purity, excellent corrosion resistance, and superior formability, GNEE 1050 aluminum sheet is a reliable and cost-effective solution. Reach out to GNEE today to explore specifications, stock availability, and tailored supply options for your project.
The 1050 aluminum sheet belongs to the commercially pure wrought aluminum family, featuring a minimum aluminum content of 99.5% Al. Compared with other aluminum alloy series, it offers stronger corrosion resistance, higher conductivity, and outstanding plasticity. While its mechanical strength is relatively low, it excels in applications where strength is not the primary requirement.
1050 Aluminum Sheet Material Characteristics
In addition to aluminum, 1050 aluminum alloy sheet contains approximately 0.4% iron (Fe), which enhances electrical conductivity while maintaining the typical properties of pure aluminum.
Key characteristics of 1050 aluminum sheet and plate include:
- High plasticity and excellent ductility
- Outstanding resistance to corrosion
- Very good electrical and thermal conductivity
- Low mechanical strength
- Excellent surface finishing and anodizing performance
These features make 1050 aluminum plate especially suitable for forming, bending, deep drawing, and surface-treated applications.
GNEE 1050 Aluminum Sheet Manufacturing Capability
As a professional aluminum supplier, GNEE has extensive experience in the production and supply of 1050 aluminum sheets and plates. We offer a wide range of tempers to meet different processing and performance needs, including:
- 1050 O aluminum sheet (annealed)
- 1050 H18 aluminum sheet
- 1050 H24 aluminum sheet
Customers are welcome to contact GNEE for detailed technical data, quotations, or customized dimensions.
1050 Aluminum Sheet Types Supplied by GNEE
-
1050 Aluminum Sheet
With its 99.5% aluminum purity, the 1050 aluminum sheet provides superior corrosion resistance and conductivity compared with many other alloy series.
-
1050 H24 Aluminum Sheet
The H24 temper is obtained through strain hardening followed by partial annealing, achieving a balance between strength and elongation.
-
1050 H18 Aluminum Sheet
This temper offers higher hardness and strength due to heavier cold working.
-
1050 O Aluminum Sheet
Fully annealed and extremely soft, ideal for deep drawing and complex forming.
1050 Aluminum Sheet Parameters and Specifications
| Item | Specification |
|---|---|
| Thickness | 0.20–0.30 mm |
| Width | 500 – 1500 mm |
| Length | 500–2000 mm |
| Thickness Tolerance | ±0.02 mm |
| Packaging | Export-standard packing, suitable for sea transport |
| Payment Terms | T/T or L/C at sight |
| Lead Time | Approx. 20–25 days |
1050 H14 Aluminum Sheet vs 1050 H24 Aluminum Sheet
In aluminum temper designations, H represents a strain-hardened condition.
1050 H14 aluminum sheet achieves its strength solely through cold working, without any additional heat treatment. Its tensile strength is approximately midway between annealed (O) and full-hard (H18).
1050 H24 aluminum sheet, on the other hand, is strain-hardened and then partially annealed. While the strength level is similar to H14, H24 offers better elongation and formability, making it more suitable for bending and shaping operations.
Aluminum Alloy 1050 Sheet Material Properties
The 1050 aluminum alloy sheet is produced by adding trace amounts of copper to pure aluminum. It demonstrates:
- Excellent forming and processing performance
- High resistance to corrosion
- Good weldability and solderability
- Stable electrical conductivity
Due to these properties, 1050 aluminum sheets and plates are widely used in applications where high strength is not required.
Applications of 1050 Aluminum Sheet
1050 aluminum sheet is commonly applied in:
- Chemical equipment and containers
- Sheet metal fabrication parts
- Deep-drawn or spun products
- Welded assemblies and heat exchangers
- Clock dials, nameplates, and decorative panels
- Kitchenware and reflective components
It is also highly suitable for electrolytic polishing and anodizing, resulting in a bright and uniform surface finish.
Advantages of 1050 Aluminum Sheet and Plate
- Non-heat-treatable alloy with excellent cold workability
- High ductility and reflectivity
- Easy to weld and solder
- Ideal for anodizing and surface finishing
- Cost-effective for large-scale production
Why Choose GNEE 1050 Aluminum Sheet
GNEE is committed to supplying high-quality 1050 aluminum sheets and plates with consistent performance, precise tolerances, and dependable delivery. Our advanced manufacturing processes and strict quality control ensure that every product meets international standards.
If you are sourcing 1050 aluminum sheet for industrial, decorative, or fabrication use, contact GNEE now to receive expert support and a competitive supply solution tailored to your requirements.
