A1050 H24 Aluminum Sheet, Plate, and Strip Overview
For projects that demand high-purity aluminum with outstanding formability and corrosion resistance, GNEE A1050 H24 aluminum sheet, plate, and strip offer a dependable and economical choice. Reach out to GNEE today to discuss specifications, standards, and supply solutions tailored to your application.
A1050 aluminum is a 99.5% pure aluminum alloy belonging to the 1000 series. The H24 temper indicates that the material has been strain-hardened beyond the minimum requirement and then partially annealed to achieve standardized mechanical properties. This process produces a balance between strength and ductility while maintaining the inherent softness of pure aluminum.
A1050 H24 Aluminum Sheet Material Characteristics
Although A1050 H24 aluminum sheet has relatively low mechanical strength, it offers several superior material advantages:
- Excellent formability, allowing complex bending and shaping
- Outstanding weldability, suitable for common welding methods
- Strong corrosion resistance, even in industrial environments
- High reflectivity, ideal for decorative and lighting applications
These properties make A1050 H24 aluminum sheet particularly suitable for applications where ease of fabrication and surface quality are more critical than structural strength.
A1050 H24 Aluminum Sheet Applications
Thanks to its purity and processing performance, A1050 H24 aluminum sheet and plate are widely used in:
- Reflection plates and lighting fixtures
- Decorative panels and ornaments
- Chemical industry tanks and containers
- Conductive and thermal transfer materials
- General industrial sheet metal components
Definitions Related to A1050 H24 Aluminum Sheet Products
Plate
A rolled aluminum product with a rectangular cross-section, supplied in straight lengths and typically produced with slit, sheared, or sawn edges.
Strip
A rolled aluminum product with a rectangular cross-section, supplied in coils and usually featuring slit edges.
Mill Edge
An edge naturally formed during rolling that remains untrimmed and uncut.
Cut Edge
An edge that has been trimmed or cut during the final processing stage, including trimmed, slit, or sheared edges depending on the cutting method.
A1050 H24 Aluminum Sheet Strain Hardening Explanation
Strain hardening (work hardening) refers to the increase in strength and hardness caused by plastic deformation below the recrystallization temperature.
Plastic deformation occurs when stress exceeds the elastic limit of the material, resulting in permanent shape change even after the external force is removed.
Chemical Composition of A1050 H24 Aluminum Sheet
| Element | Maximum Content (%) |
|---|---|
| Silicon (Si) | 0.25 |
| Iron (Fe) | 0.40 |
| Copper (Cu) | 0.05 |
| Manganese (Mn) | 0.05 |
| Magnesium (Mg) | 0.05 |
| Zinc (Zn) | 0.05 |
| Vanadium (V) | 0.05 |
| Titanium (Ti) | 0.03 |
| Other (each) | 0.03 |
| Aluminum (Al) | ≥ 99.50 |
Mechanical Properties of A1050 H24 Aluminum Sheet (JIS H4000)
| Thickness (mm) | Tensile Strength (MPa) | Proof Strength (MPa) | Elongation (%) |
|---|---|---|---|
| 0.2 ≤ t ≤ 0.3 | 95–125 | – | ≥ 1 |
| 0.3 ＜ t ≤ 0.5 | 95–125 | – | ≥ 2 |
| 0.5 ＜ t ≤ 0.8 | 95–125 | – | ≥ 3 |
| 0.8 ＜ t ≤ 1.3 | 95–125 | ≥ 75 | ≥ 4 |
| 1.3 < t ≤ 2.9 | 95–125 | ≥ 75 | ≥ 5 |
| 2.9 ＜ t ≤ 12 | 95–125 | ≥ 75 | ≥ 6 |
A1050 H24 Aluminum Sheet for Industrial Use
A1050 aluminum alloy is produced from high-purity aluminum with trace copper additions. Compared with other pure aluminum grades, 1050 aluminum offers slightly higher strength, approaching the performance of 1060 aluminum.
Key industrial characteristics include:
- High plasticity and corrosion resistance
- Excellent electrical and thermal conductivity
- Non-heat-treatable structure
- Limited machinability
- Compatibility with contact and gas welding
In the 1000 series, higher aluminum purity results in lower hardness, which explains the outstanding forming performance of A1050 H24 aluminum sheet.
Why Choose GNEE A1050 H24 Aluminum Sheet
GNEE supplies A1050 H24 aluminum sheet, plate, and strip with stable composition, precise dimensional tolerance, and reliable surface quality. Our products meet international standards and are suitable for demanding industrial and decorative applications.
To explore customized dimensions, bulk supply, or technical support, connect with GNEE today and discover how A1050 H24 aluminum can bring efficiency and value to your next project.
