HENAN GNEE NEW MATERIAL CO., LTD
86-372-5055135

Mechanical Properties of 5052 Aluminum Alloy and 6061 Aluminum Alloy

5052 and 6061 aluminum alloys each feature distinct mechanical properties that determine their suitability for different applications. Below is a comparison of their key mechanical characteristics:

 

5052 Aluminum Alloy

Tensile Strength:
Typically ranges from 31,000 psi (214 MPa) to 41,000 psi (283 MPa), depending on the temper.

Yield Strength:
Falls between 12,000 psi (83 MPa) and 30,000 psi (207 MPa), based on temper designation.

Elongation:
Exhibits excellent ductility, with elongation values typically between 12% and 25%.

Hardness:
Generally offers a Brinell hardness range of 47 to 67.

 

6061 Aluminum Alloy

Tensile Strength:
Typically varies from 27,000 psi (186 MPa) to 45,000 psi (310 MPa), depending on temper.

Yield Strength:
Ranges from 8,000 psi (55 MPa) to 40,000 psi (276 MPa), influenced by temper.

Elongation:
Provides good ductility, with elongation values generally between 8% and 25%.

Hardness:
Has a higher Brinell hardness, usually between 95 and 150.

 

Comparison

Strength:
6061 aluminum generally offers superior tensile and yield strength compared to 5052, making it more appropriate for load-bearing or structural applications.

Formability:
Both alloys are formable, but 5052 may be slightly more advantageous due to its higher elongation.

Hardness:
6061 aluminum possesses greater hardness, providing improved resistance to wear and deformation.

Applications:
Selection between these alloys depends on the required mechanical performance. 6061-widely supplied by GNEE-is favored for high-strength applications, while 5052 is used in projects where enhanced corrosion resistance and better formability are essential.

 

Effect of Temper

Both 5052 and 6061 are produced in a variety of tempers-such as O, H32, H34, T4, and T6-which significantly influence their mechanical behavior. This allows GNEE and other manufacturers to tailor the materials to meet specific project requirements.

 

Conclusion

In summary, the mechanical differences between 5052 and 6061 aluminum-including tensile strength, yield strength, elongation, and hardness-play a critical role in determining their ideal applications. The appropriate alloy is chosen based on the desired balance of strength, formability, and overall performance for the intended use.

   5052 and 6061 aluminum alloys