Three conditions must exist for a fire or explosion in aluminum foil rolling: combustible materials, such as rolling oil, cotton yarn, hoses, etc.; combustion-supporting materials, that is, oxygen in the air; fire sources and high temperatures, such as friction, sparks, static electricity, open flames, etc. . If any of these conditions are missing, there will be no fire or explosion.

The oil vapor and oxygen in the air generated during high-speed aluminum foil rolling are unavoidable. Therefore, the key to safe fire prevention in high-speed aluminum foil rolling mills is how to eliminate fire sources and high temperatures generated by local overheating. The main measures are as follows:
1. In high-speed aluminum foil rolling, it is difficult to avoid the high concentration of oil vapor generated around the rolling mill. In order to reduce the concentration of oil vapor as much as possible, the normal operation of the smoke exhaust device should be ensured and its exhaust volume should be maximized.
2. Strengthen the inspection and inspection of the oil mist lubrication system of the work roll, backup roll, and guide roll to ensure that the oil level, oil pressure, air pressure, and temperature of the oil mist generator meet the requirements, and the connecting pipeline between the oil mist generator and the bearing box It should be smooth to provide adequate lubrication conditions. Poor oil mist lubrication is one of the main causes of fires in rolling mills. During production, key management of the oil mist lubrication system should be carried out, and problems should be stopped in a timely manner.
3. Strengthen the inspection and management of the inner rings and bearings of the rolls. Every roll change should be inspected, and faulty parts should be repaired and replaced in a timely manner. The installation tightness of the bearing box should be moderate to avoid relative movement between the roller neck and the bearing inner sleeve.
4. In places where there is oil vapor, explosion-proof electrical equipment must be used. After the overhead crane spreader is removed, the power supply to the spreader should be cut off immediately.
5. The belt breakage protection device should be sensitive and effective, and the thickness of the aluminum foil blank should be uniform and not allowed to suddenly thicken to avoid the occurrence of stuffing. In terms of operation, the rolling mill speed should be appropriately reduced at the end of the coil.
6. Improve the operating level, reduce belt breakage, and promptly clean the broken aluminum pieces in the rolling mill body and oil collection pan. The rolling mill body, pipeline oil tank, etc. should be well grounded.
7. Choose base oil and additives wisely. In addition to good lubrication, cooling, fluidity, annealing performance, stability and no unpleasant odor, the high-speed aluminum foil rolling oil also has the following characteristics: base oil and additives, or two or more additives. It must have good mutual tolerance and non-deterioration characteristics. "Sludge" is produced during the rolling process of aluminum foil, which is mainly caused by poor mutual compatibility between base oil and additives or additives. Choosing reasonable base oil and additives is of great significance to improving the quality of aluminum foil and preventing fire accidents caused by "sludge". If "sludge" occurs, unreasonable additives or base oil should be replaced in time. At the same time, an appropriate amount of antistatic agent can be added to the rolling oil.

8. Strictly use open flame operation system. Before using open flames in fire prevention areas, flammable and explosive items around the work area should be cleared in time, and professional fire fighters and safety personnel should implement safe fire protection on site.
9. Ensure the reliability of safety fire protection devices.
10. Strengthen employee education. Every employee should understand the common sense of safety and fire prevention, the correct use of fire extinguishing equipment, and the correct use of fire extinguishing equipment. Remember the fire alarm phone number. When a fire occurs, fire extinguishing measures should be taken first, and at the same time, call the fire alarm phone number as quickly as possible to avoid delaying the opportunity to put out the fire.
There are many reasons for fire accidents in aluminum foil production, including production process technology, production safety management and production equipment. Practice has proved that as long as the safety and fire prevention of high-speed aluminum foil rolling mills is based on the above aspects and effective safety and fire prevention measures are taken, the occurrence of fire accidents can be avoided to the greatest extent.







