1050A H14 Aluminum Sheet – Reliable Aluminum Plate for General Engineering Applications
Looking for a cost-effective aluminum sheet with excellent formability and corrosion resistance?
GNEE supplies high-quality 1050A H14 aluminum sheet and aluminum plate designed for general-purpose fabrication, architectural, and industrial applications worldwide.
What Is 1050A H14 Aluminum Sheet?
1050A H14 aluminum sheet is a commercial-purity aluminum plate with a minimum aluminum content of 99.5%. It belongs to the 1000 series aluminum alloy family, known for outstanding ductility, corrosion resistance, and electrical and thermal conductivity.
The H14 temper indicates a strain-hardened condition, providing moderate strength while maintaining excellent workability. This makes 1050A aluminum sheet ideal for general sheet metal work where high formability and surface quality are required rather than high mechanical strength.
1050A Aluminum Sheet Size Range (GNEE Supply)
Standard Flat Aluminum Sheet Sizes
| Sheet Size (mm) | Thickness Range |
|---|---|
| 2000 × 1000 | 0.5 – 3.0 mm |
| 2500 × 1250 | 0.5 – 3.0 mm |
| 3000 × 1250 | 1.0 – 3.0 mm |
| 3000 × 1500 | 1.2 – 4.0 mm |
| 4000 × 1000 | 2.0 – 3.0 mm |
| 4000 × 1250 | 2.0 – 3.0 mm |
| 4000 × 1500 | 2.0 – 3.0 mm |
| 4000 × 2000 | 2.0 – 3.0 mm |
Some 1050A aluminum sheets can be supplied poly-coated on one or both sides upon request.
1050A Stucco Aluminum Sheet Specifications
| Sheet Size (mm) | Thickness Range |
|---|---|
| 2000 × 1000 | 0.5 – 0.8 mm |
| 2500 × 1250 | 0.5 – 1.2 mm |
Stucco-embossed 1050A aluminum sheet is commonly used for decorative, insulation, and reflective applications.
Related Standards and Equivalent Designations of 1050A Aluminum Plate
1050A aluminum alloy corresponds to several international standards (not always exact equivalents):
AA1050
S1B
A91050
EN AW-1050A
Common Temper of 1050A Aluminum Sheet
H14 (strain-hardened) – the most widely used temper for general aluminum plate fabrication
Chemical Composition of 1050A Aluminum Sheet (EN 573-3)
| Element | Content (%) |
|---|---|
| Silicon (Si) | 0.00 – 0.25 |
| Iron (Fe) | 0.00 – 0.40 |
| Copper (Cu) | 0.00 – 0.05 |
| Manganese (Mn) | 0.00 – 0.05 |
| Magnesium (Mg) | 0.00 – 0.05 |
| Zinc (Zn) | 0.00 – 0.07 |
| Titanium (Ti) | 0.00 – 0.05 |
| Other (each) | ≤ 0.03 |
| Aluminum (Al) | Balance (≥99.5%) |
Mechanical Properties of 1050A H14 Aluminum Sheet (EN 485-2)
Applicable for sheet thickness 0.2 – 6.0 mm
| Property | Value |
|---|---|
| Tensile Strength | 105 – 145 MPa |
| Proof Stress | ≥ 85 MPa |
| Brinell Hardness | 34 HB |
| Elongation (A50) | ≥ 12% |
Physical Properties of 1050A Aluminum Plate
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | 650 °C |
| Modulus of Elasticity | 71 GPa |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Thermal Conductivity | 222 W/m·K |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω·m |
Typical Applications of 1050A Aluminum Sheet
GNEE 1050A aluminum plate is widely used in industries requiring excellent corrosion resistance and formability, including:
Chemical processing plant equipment
Food industry containers
Pyrotechnic powder manufacturing
Architectural flashings
Lamp reflectors and lighting components
Cable sheathing
General sheet metal fabrication
Key Characteristics of 1050A Aluminum Plate
Excellent corrosion resistance
High ductility and formability
Highly reflective surface finish
Outstanding weldability
Superior cold-working performance
Fabrication Performance of 1050A Aluminum Sheet
| Process | Rating |
|---|---|
| Cold Workability | Excellent |
| Machinability | Poor |
| Gas Welding | Excellent |
| Arc Welding | Excellent |
| Resistance Welding | Excellent |
| Brazing | Excellent |
| Soldering | Excellent |
Welding Recommendations for 1050A Aluminum Plate
1050A to 1050A or same group alloys: use 1100 filler wire
1050A to 5083 / 5086 or 7xxx alloys: use 5356 filler wire
1050A to other aluminum alloys: use 4043 filler wire
Proper filler selection ensures optimal weld strength and corrosion performance.
Why Choose GNEE 1050A Aluminum Sheet?
GNEE provides strictly controlled chemical composition, flat surface quality, and international standard compliance for every 1050A aluminum sheet and plate. Each batch can be supplied with mill test certificates (MTC) to guarantee consistency and reliability.
Get a Competitive Quote from GNEE Today
Contact GNEE now for detailed specifications, pricing, and customized aluminum sheet solutions. Our technical team is ready to support your project with professional aluminum supply services worldwide.
