HENAN GNEE NEW MATERIAL CO., LTD
86-372-5055135

1050 Aluminum Plate: Composition, Properties and Applications

Jan 30, 2026

What Is 1050 Aluminum Plate?

1050 aluminum plate belongs to the pure aluminum series, with an aluminum content exceeding 99.5%. The remainder consists of trace amounts of iron, silicon and other minor impurities. Produced from high-purity aluminum ingots, the material offers outstanding ductility and plasticity, making it suitable for a wide range of forming and fabrication processes.

Compared with alloyed aluminum grades, 1050 plate provides superior corrosion resistance and electrical conductivity, which makes it ideal for applications that demand high purity, stable performance and ease of forming. It is a non-heat-treatable alloy, so its strength is controlled by cold working and temper rather than by aging treatments.

Chemical Composition and Mechanical Properties

Per the composition ranges associated with ASTM B209 and comparable specifications, 1050 contains at least 99.5% aluminum, with iron up to 0.40%, silicon up to 0.25% and other elements limited to 0.05% total. The values below are typical ranges and may vary with processing conditions and the governing standard edition.

In the O (annealed) temper, typical tensile strength is 55-95 MPa, yield strength 20-40 MPa and elongation at least 25%, giving maximum formability. In the H14 (half-hard) temper, tensile strength is typically 90-120 MPa, yield strength 60-90 MPa and elongation at least 10%. In the H18 (full-hard) temper, tensile strength is typically 150-180 MPa and yield strength 140-160 MPa, with elongation around 2%.

Production Process

Manufacturing begins with the melting of high-purity aluminum ingots at approximately 660 degrees Celsius, the melting point of aluminum. Small amounts of alloying agents are added to control impurity levels. The molten aluminum is cast into slabs, which are then processed through hot rolling and cold rolling stages to achieve the required thickness.

Annealed material in the O temper undergoes heat treatment at approximately 300-400 degrees Celsius to relieve internal stress and improve ductility, while harder tempers are achieved through controlled cold rolling. Throughout the process, energy efficiency and material uniformity are maintained to meet industrial standards.

Key Material Characteristics

Because of its high purity, 1050 aluminum plate offers a well-balanced combination of properties. Its dense natural oxide film gives excellent corrosion resistance against atmospheric and chemical exposure. Electrical and thermal conductivity is approximately 62% IACS, second only to copper among common metals, which makes the alloy valuable for electrical and heat-transfer components.

The material is easy to bend, stamp, weld and form into complex shapes, and its density of only 2.7 g/cm3 significantly reduces structural weight while maintaining functional reliability. It is also fully recyclable, supporting circular manufacturing practices.

Typical Applications

In the electronics industry, 1050 plate is used for heat sinks, capacitor housings and conductive components. In architectural decoration, it appears in curtain wall panels, ceiling systems and decorative sheets. The packaging sector uses it for food foil and pharmaceutical packaging where safety and purity are essential, and chemical equipment applications include tank linings and corrosion-resistant containers. Its workability also makes it relevant in emerging green technologies and energy-efficient systems.

1050 vs 6061: Choosing the Right Grade

1050 and 6061 serve very different purposes. 1050 is a high-purity, non-heat-treatable alloy with low strength but excellent conductivity, corrosion resistance and formability; it is the right choice where forming, conductivity or purity matters more than load-bearing capacity. 6061 is a heat-treatable aluminum-magnesium-silicon alloy with medium-to-high strength, good weldability and structural performance, and it is the standard choice for frames, machine parts and load-bearing assemblies.

In short, specify 1050 for electrical, thermal, decorative and packaging applications, and 6061 when the component must carry mechanical loads.

FAQ

Q: What does the 1050 designation mean?

A: In the international alloy designation system, 1050 indicates a wrought aluminum alloy with at least 99.5% aluminum content. The final two digits denote the purity level.

Q: Is 1050 aluminum plate heat treatable?

A: No. 1050 is a non-heat-treatable alloy, so its strength is adjusted through cold working and temper, not through solution heat treatment and aging.

Q: What is the electrical conductivity of 1050 aluminum?

A: Approximately 62% IACS, which is high among aluminum alloys and second only to copper among common metals. This makes 1050 suitable for busbars, heat sinks and conductive components.

Q: Which temper should I choose for deep forming?

A: The O (annealed) temper offers the highest ductility, with elongation of at least 25%, and is the best choice for deep drawing, bending and complex forming operations.

Q: How does 1050 compare with 6061 for structural use?

A: 1050 has much lower strength and is not suitable for load-bearing structures. 6061, a heat-treatable alloy, provides medium-to-high strength and weldability and should be selected wherever mechanical loads are involved.