HENAN GNEE NEW MATERIAL CO., LTD
86-372-5055135

Main components and uses of 2A12 aluminum rod

Mar 06, 2024

Introduction to 2A12 (LY12) aluminum alloy: 2A12 is a typical hard aluminum alloy in the aluminum-copper-magnesium system. Its composition is relatively reasonable and its overall performance is good. Many countries produce this alloy, which is the most widely used among hard aluminum.

Main components and uses of 2A12 aluminum rod

2A12 (LY12) Chemical composition: Aluminum Al: Balance silicon Si: ≤0.50 Copper Cu: 3.8~4.9 Magnesium Mg: 1.2~1.8 Zinc Zn: ≤0.30 Manganese Mn: 0.30~0.9 Titanium Ti: ≤0.15 Nickel Ni: ≤0.10 Iron: 0.000~0.500 Iron+nickel Fe+Ni: 0.000~0.500 Note: Single: ≤0.05; Total: ≤0.10
2A12 (LY12) heat treatment specifications: 1. Homogenization annealing: heating 480 ~ 495; insulation 12 ~ 14h; furnace cooling. 2. Complete annealing: heating to 390-430°C; holding time 30-120min; furnace cooling to 300°C and air cooling. 3. Rapid annealing: heating 350~370°C; holding time 30~120min; air cooling. 4. Quenching and aging: quenching 495~505, water cooling; artificial aging 185~195, 6~12h, air cooling; natural aging: 96h at room temperature.

Main components and uses of 2A12 aluminum rod

2A12 (LY12) aluminum rod performance and use: 2A12 aluminum alloy plate characteristics and scope of application: 2a12 aluminum alloy plate is a high-strength hard aluminum that can be strengthened by heat treatment. It has medium plasticity in annealing, fresh quenching and thermal conditions, and is spot welded. The alloy has good machinability, but has a tendency to form intergranular cracks when using gas welding and argon arc welding; the alloy has good machinability after quenching and cold work hardening, but is poor in the annealed state. The corrosion resistance is not high, and anodizing and painting methods are often used, or an aluminum layer is added to the surface to improve corrosion resistance. 2A12 is used in aircraft structures (skin, frame, ribs, bulkheads, etc.), rivets, elastic components, truck hubs, propeller components and other various structural parts.