Steel foil raw material 3003 H24 is iron alloy, H24 display processing method is in a Japanese state, and it is also in a semi-hard state.
3003 The main components of iron and iron alloy plates, the main components of iron and iron, the use of iron, the strength of the metal, and the creation of a partial micrometalization processing method.
Is it possible to process copper foil raw materials in H24?
Conditions in which processing is required and the demand for raw materials for steel foil is not sufficient:
Alloy composition: The alloy composition requirements of the raw material for steel foil, usually 3003 or 8011 etc. alloy.
Thickness: Generally the thickness of silver foil is between 0.03mm-0.15mm.
Surface quality: Silver foil surface smooth, smooth, no scratches, no air bubbles, etc.
Processing technology: Combined processing technology, follow-up, strength, partial size conversion, etc., as required by the H24 situation.
After processing: After the process of steel foil, according to the demand, follow the process, straighten the surface layer, etc., and then increase the surface quality and processing performance.
However, the processing required is H24-state steel foil raw material, alloy composition according to demand, thickness, surface quality, processing method and after-processing method, ensuring that the final product performance conforms to the quality requirements.







