EN AW 1050A Aluminum Plate (Al 99.5) – High-Purity Aluminum Solutions from GNEE
Looking for a high-purity EN AW 1050A aluminum plate with stable properties and international standards compliance?
GNEE, a Chinese supplier of aluminum products, offers EN AW 1050A (Al 99.5) aluminum plates, sheets, coils, and foils with consistent quality, flexible dimensions, and global delivery. Contact GNEE today for technical support and fast quotations.
EN AW 1050A Aluminum Plate Overview (Al 99.5)
EN AW 1050A aluminum plate, also known as Al 99.5, belongs to the 1000 series industrial pure aluminum alloys. With a minimum aluminum content of 99.5%, it delivers excellent corrosion resistance, outstanding electrical and thermal conductivity, and superior formability.
This aluminum plate is widely used in electrical, chemical, construction, packaging, and decorative applications where high purity and reliability are essential.
EN AW 1050A Aluminum Plate Chemical Composition
The chemical composition of EN AW 1050A aluminum plate strictly follows EN standards and ensures high purity with controlled impurity levels.
EN AW 1050A Aluminum Plate – Chemical Composition Table
| Element | Content (%) |
|---|---|
| Aluminum (Al) | ≥ 99.5 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.07 |
| Titanium (Ti) | ≤ 0.05 |
| Chromium (Cr) | - |
| Nickel (Ni) | - |
| Gallium (Ga) | - |
| Vanadium (V) | - |
EN AW 1050A Aluminum Plate Mechanical Properties – O / H111 Temper
In O and H111 temper, EN AW 1050A aluminum plate provides maximum ductility and excellent forming performance.
EN AW 1050A Aluminum Plate Mechanical Properties (O / H111)
| Thickness (mm) | HBW | Yield Strength Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Elongation A50 (%) | Min. Bend Radius 180° (t) |
|---|---|---|---|---|---|
| 0.2 – 0.5 | 20 | ≥ 20 | 65 – 95 | ≥ 20 | 0 |
| 0.5 – 1.5 | 20 | ≥ 20 | 65 – 95 | ≥ 22 | 0 |
| 1.5 – 3.0 | 20 | ≥ 20 | 65 – 95 | ≥ 26 | 0 |
| 3.0 – 6.0 | 20 | ≥ 20 | 65 – 95 | ≥ 29 | 0.5 |
| 6.0 – 12.5 | 20 | ≥ 20 | 65 – 95 | ≥ 35 | 1 |
| 12.5 – 80.0 | 20 | ≥ 20 | 65 – 95 | ≥ 32 | - |
EN AW 1050A Aluminum Plate Mechanical Properties – H19 Temper
H19 temper EN AW 1050A aluminum plate is fully cold-worked, offering higher strength with limited ductility.
EN AW 1050A Aluminum Plate Mechanical Properties (H19)
| Thickness (mm) | HBW | Yield Strength Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Elongation A50 (%) |
|---|---|---|---|---|
| 0.2 – 0.5 | 45 | ≥ 140 | ≥ 155 | ≥ 1 |
| 0.5 – 1.5 | 45 | ≥ 130 | ≥ 150 | ≥ 1 |
| 1.5 – 3.0 | 45 | ≥ 130 | ≥ 150 | ≥ 1 |
EN AW 1050A Aluminum Plate Mechanical Properties – H22 Temper
H22 aluminum plate is strain-hardened and partially annealed, balancing strength and formability.
EN AW 1050A Aluminum Plate Mechanical Properties (H22)
| Thickness (mm) | HBW | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A50 (%) |
|---|---|---|---|---|
| 0.2 – 0.5 | 27 | ≥ 55 | 85 – 125 | ≥ 4 |
| 0.5 – 1.5 | 27 | ≥ 55 | 85 – 125 | ≥ 5 |
| 1.5 – 3.0 | 27 | ≥ 55 | 85 – 125 | ≥ 6 |
| 3.0 – 6.0 | 27 | ≥ 55 | 85 – 125 | ≥ 11 |
| 6.0 – 12.5 | 27 | ≥ 55 | 85 – 125 | ≥ 12 |
EN AW 1050A Aluminum Plate Mechanical Properties – H24 Temper
EN AW 1050A H24 aluminum plate provides a well-balanced combination of moderate strength and good ductility, making it ideal for industrial processing.
EN AW 1050A Aluminum Plate Mechanical Properties (H24)
| Thickness (mm) | HBW | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation A50 (%) | Min. Bend Radius 180° (t) |
|---|---|---|---|---|---|
| 0.2 – 0.5 | 33 | ≥ 75 | 105 – 145 | ≥ 3 | 1 |
| 0.5 – 1.5 | 33 | ≥ 75 | 105 – 145 | ≥ 4 | 1 |
| 1.5 – 3.0 | 33 | ≥ 75 | 105 – 145 | ≥ 5 | 1 |
| 3.0 – 6.0 | 33 | ≥ 75 | 105 – 145 | ≥ 8 | 1.5 |
| 6.0 – 12.5 | 33 | ≥ 75 | 105 – 145 | ≥ 8 | 2.5 |
EN AW 1050A Aluminum Plate Physical Properties
EN AW 1050A Aluminum Plate Physical Data Table
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Thermal Conductivity | 222 – 237 W/(m·K) |
| Electrical Conductivity | ~57–58% IACS |
| Electrical Resistivity | 0.0281 Ω·mm²/m |
| Thermal Expansion | 23.6 μm/m·K |
| Melting Point | 646 – 657 °C |
EN AW 1050A Aluminum Plate Processing & Surface Performance
EN AW 1050A Aluminum Plate Fabrication Characteristics
| Aspect | Performance |
|---|---|
| Formability | Excellent; suitable for stamping, bending, stretching |
| Weldability | Excellent; TIG, MIG, and gas welding supported |
| Machinability | Average; sharp tools recommended |
| Anodizing | Very good; bright and uniform oxide layer |
| Surface Treatment | Suitable for painting, coating, polishing |
EN AW 1050A Aluminum Plate Applications
EN AW 1050A Aluminum Plate Typical Uses
| Industry | Application |
|---|---|
| Electrical | Busbars, transformer strips, conductive plates |
| Electronics | Heat sinks, shielding plates, capacitor components |
| Construction | Decorative panels, signage, trims |
| Chemical | Reactor linings, storage tanks |
| Packaging | Foil stock, food & pharmaceutical packaging |
| Transportation | Non-load-bearing panels, heat exchangers |
EN AW 1050A Aluminum Plate Advantages and Limitations
EN AW 1050A Aluminum Plate Summary Table
| Advantages | Limitations |
|---|---|
| High purity and conductivity | Lower mechanical strength |
| Excellent corrosion resistance | Limited wear resistance |
| Outstanding formability | Not suitable for high-stress parts |
| Low density and cost-effective | Average machinability |
EN AW 1050A Aluminum Plate Standards and Equivalents
| Standard System | Equivalent |
|---|---|
| EN | EN AW-1050A |
| DIN | Al 99.5 |
| ASTM | AA 1050 |
| ISO | ISO 6361 |
EN AW 1050A Aluminum Plate Supply from GNEE
GNEE supplies EN AW 1050A aluminum plates, sheets, coils, and foils with customized thickness, width, and temper options, fully compliant with EN, ASTM, and ISO standards.
Contact GNEE today for datasheets, pricing, and tailored aluminum solutions. Our technical team is ready to support your project with reliable EN AW 1050A aluminum plate products and professional service.
