HENAN GNEE NEW MATERIAL CO., LTD
86-372-5055135

EN AW-1050A Aluminium Bar Grade Description

Jan 31, 2026

1050A Aluminium Alloy Bar – Commercial Pure Aluminium for General Engineering

Looking for a reliable commercial aluminium alloy with excellent corrosion resistance and forming performance?
GNEE 1050A Aluminium Alloy Bar is a high-purity, non-heat-treatable aluminum solution designed for general engineering and fabrication applications where high strength is not required but stability and surface quality are essential.

Contact now

1050A Aluminium Alloy Bar Overview

1050A Aluminium Alloy is an unalloyed ("pure") aluminum grade belonging to the 1000 series. It is non-heat-treatable and engineered specifically for applications where good workability, corrosion resistance, and surface finish are more important than mechanical strength.

With a minimum aluminum content of 99.50%, 1050A aluminium bar and rod offer consistent performance across a wide range of industrial environments.

 

EN AW-1050A Aluminium Bar Grade Description

EN AW-1050A H14 Aluminium Alloy Bar is internationally recognized and corresponds to:

Al 99.5

Former BS designation: S1B

Former half-hard temper: H4

The H14 temper indicates the material has been strain hardened to half-hard condition, providing improved rigidity compared to annealed aluminum while retaining excellent ductility.

All GNEE 1050A aluminium alloy products fully comply with relevant national and international standards.

 

1050A Aluminium Alloy Bar Chemical Composition

Element Content (%)
Aluminum (Al) ≥ 99.50
Silicon (Si) ≤ 0.25
Iron (Fe) ≤ 0.40
Copper (Cu) ≤ 0.05
Manganese (Mn) ≤ 0.05
Magnesium (Mg) ≤ 0.05
Zinc (Zn) ≤ 0.05
Titanium (Ti) ≤ 0.03
Others (Each) ≤ 0.03

This high-purity composition ensures excellent corrosion resistance and anodizing performance.

 

1050A Aluminium Bar Mechanical Properties (H14)

Property Typical Value
Tensile Strength 95 – 125 MPa
Yield Strength (0.2%) ≥ 75 MPa
Elongation Good
Hardness Moderate (Half-Hard)

Note: 1050A aluminium alloy is selected primarily for formability and surface quality rather than high strength.

 

1050A Aluminium Alloy Bar Corrosion Resistance

Due to its unalloyed nature and high aluminum purity, 1050A aluminium bar provides excellent resistance to atmospheric and industrial corrosion.

It is suitable for:

Industrial environments

General outdoor exposure

Light marine-adjacent applications

For fully marine environments, alloyed grades such as 5251 (NS4) may be more appropriate; however, 1050A aluminium alloy remains a cost-effective choice for many non-structural applications.

 

1050A Aluminium Bar Machining Characteristics

Pure aluminium alloys, including 1050A aluminium bar, exhibit fair machinability due to their softness.

Machining Recommendations:

Use sharp aluminum-specific cutting tools

Maintain moderate cutting speeds to prevent built-up edge

High-speed steel (HSS) tools are often more economical than carbide

Large rake angles help improve chip evacuation

The H14 temper improves hardness compared to annealed material, offering better machining stability while maintaining ductility.

 

1050A Aluminium Alloy Bar Surface Treatment

1050A aluminium alloy bar demonstrates excellent response to surface finishing processes, making it ideal for both decorative and technical applications.

Suitable Surface Treatments:

Anodizing (decorative and functional)

Chemical brightening

Electrolytic brightening

Polishing

Its uniform grain structure ensures consistent surface appearance after treatment.

 

Typical Applications of 1050A Aluminium Alloy Bar

GNEE 1050A Aluminium Bar and Rod are widely used in:

General sheet metal work

Heat transfer devices

Pressure vessels

Boiler making

Household and industrial appliances

Architectural components

Automotive non-structural parts

 

Available Forms of 1050A Aluminium Alloy from GNEE

GNEE stocks and supplies 1050A aluminium alloy in multiple forms:

Product Form
Aluminium Bar
Aluminium Rod
Aluminium Plate
Aluminium Sheet
Aluminium Strip

Custom sizes and cut-to-length services are available upon request.

 

Technical Support for 1050A Aluminium Alloy Bar

At GNEE, our experienced technical team is available to support your project with:

Alloy selection guidance

Machining and surface treatment advice

Standards compliance assistance

Quality documentation

Our commitment to quality and service ensures reliable aluminium solutions from inquiry to delivery.

 

Contact GNEE for 1050A Aluminium Alloy Bar Solutions

If you are sourcing 1050A aluminium bar, rod, or plate for commercial or industrial applications,
contact GNEE today for technical consultation, pricing, and fast global supply.

Premium Aluminum BarPremium Aluminum Bar