Aluminum foil that has been heat-sealed is a specialty packaging material used for items including food, medications, and cosmetics. Its outstanding sealing and resistance to corrosion shield contents from dust, moisture, oxygen, and germs, increasing product freshness and shelf life.
In addition to meeting food and drug requirements like SGS, FDA, and others, GNEE 8011, 1235, and 8079 aluminum foil for heat sealing packaging conforms with aluminum foil production standards including ASTM B209, EN573-1, EN546; ISO 209-1; GB/T 3198; GB/T 3190; GB/T 3880.1-2006; and ISO 9001-2000.
Specification of GNEE heat sealing aluminum foil
| Alloy | 8011 1235 8079 |
| Temper | O H18 H22 H24 |
| Thickness of aluminum foil | 30-60mic;Commonly used 38mic |
| Width of aluminum foil | 100-1600mm |
| Length of aluminum foil | coil |
| Quality requirement | For high precision aluminum foil: staggered layer ≤ 0.5, tower shape ≤ 1.0, pinhole diameter ≤ 0.1 Click to view the specific production quality [Deviation Data Table] |
| Surface treatment | degreasing, embossing, printing |
| The thickness of the heat-sealing coating | 0.025mm, 0.076mm, 0.127mm, etc. Sealing coating thickness can be customized. |
| Packaging | 1) Plastic film＋corrugated paper＋non fumigation wooden tray＋plastic tape. 2) Plastic film＋non fumigation plywood box＋plastic tape. 3) Special packaging requirements are available. |
Features of GNEE bestselling 8011 1235 8079 hot sealing aluminum foil
Aluminum foil is smooth, clean, and uniformly colored; it also performs well when uncoiling and adheres to specifications.
No oil stains, rolling marks, white rust, coil group, spots, pinholes, edge damage, bending, dents, scratches, etc.
superior shading, moisture resistance, and barrier power;
Outstanding mechanical performance and strong resistance to tearing, punctures, and blasting;
There is widespread usage of composite, printing, and coating materials for packaging; able to print patterns and embossed lettering;
It is safe, odorless, nontoxic, and hygienic; it can be punctured, peeled, resealed, and sterilized at high temperatures.
Chemical composition and mechanical properties of GNEE 8011 1235 8079 hot sealing aluminum foil
| Element | Chemical composition (%) | |||
| 8011 | 1235 | 8021 | 8079 | |
| Al | Reminder | 99.3.5 | 99.0 | Reminder |
| Si | 0.50 - 0.90 | 0.65 (Si+Fe) | 0.6-1.0 | 0.50-0.90 |
| Fe | 0.60 - 1 | ≤0.1 | 0.70-1.3 | |
| Cu | ≤ 0.10 | ≤ 0.05 | ≤0.1 | ≤0.05 |
| Mn | ≤ 0.20 | ≤ 0.05 | ≤0.05 | ≤0.05 |
| Mg | ≤ 0.050 | ≤ 0.05 | ≤0.05 | ≤0.05 |
| Cr | ≤ 0.050 | - | - | - |
| Zn | ≤ 0.10 | ≤ 0.10 | ≤0.10 | ≤0.10 |
| Ti | ≤ 0.080 | ≤ 0.06 | ≤0.08 | - |
| Mechanical Properties | ||||
| Alloy | Temper | Tensile strength Rm/MPa | Elongation A50mm(%)≥ | Elongation A100mm(%)≥ |
| 8011 8079 | O | 50-120 | 13-15 | 0.5-4 |
| H22 | 90-150 | 5-6 | 1.0-2.0 | |
| H24 | 120-170 | 2-5 | - | |
| H26 | 140-190 | 1-2 | - | |
| 1235 | H14 H24 | 110-160 | 4-6 | 2-3 |
| H16 H26 | 125-180 | 2 | 1 | |
Why GNEE Aluminum as the supplier for heat sealing foil?
GNEE has all the equipment needed to produce aluminum foil, including a rolling mill, winding machine, roll grinder, annealing furnace, thick and thin shears, and thin foil shears. Aluminum foil with a thickness of 0.005-0.2mm and a width of 20-2000mm can be supplied in a variety of specifications.
The rolling mill for aluminum foil has a highly stable, fully hydraulic setting. The finishing mill's maximum speed is 1200 m/min, while the coarse and medium rolling mill's maximum speed is 2000 m/min. Aluminum foil with a width of 1850–2000 mm can be sliced using the slitting machine.
With high-performance tools like vacuum and automatic surface quality testing for aluminum foil, online surface quality testing reports, and pinhole testing reports for the full length of aluminum foil goods, zero defect delivery is achieved.
Deviation data table for GNEE aluminum foil products
| Thickness (mm) | Number of pinholes (not greater than)(≤) | Pinhole diameter mm(≤) | |||||||
| Within any 1 m2 | Any 4 mm×4 mm or 1 mm×16 mm | ||||||||
| Ultra-high precision level | High precision level | Ordinary level | Ultra-high precision level | High precision level | Ordinary level | Ultra-high precision level | High precision level | Ordinary level | |
| 0.004 0-＜0.0060 | Specific thickness according to customer requirements | 6 | 7 | 8 | 0.1 | 0.2 | 0.3 | ||
| 0.0060 | 500 | 1000 | l 500 | ||||||
| ＞0.0060-0.0065 | 400 | 600 | l 000 | ||||||
| ＞0.0065-0.0070 | 150 | 300 | 500 | ||||||
| ＞0.0070-0.0090 | 100 | 150 | 200 | ||||||
| ＞0.0090-0.0120 | 20 | 50 | 100 | ||||||
| ＞0.0120-0.0180 | 10 | 30 | 50 | 3 | |||||
| ＞0.0180-0.0200 | 3 | 20 | 30 | ||||||
| ＞0.0200-0.0400 | 0 | 5 | 10 | ||||||
| ＞0.0400 | 0 | 0 | 0 | 0 | |||||
| Adhesion | ||
| Thickness mm | Width mm | Peel-off length m |
| ≤0.1000 | ≤1000.0 | ≤1.0 |
| ＞1000.0 | ≤1.5 | |
| Staggered layer and tower shape | |||
| Staggered layer | Tower shape | ||
| High precision level | Ordinary level | High precision level | Ordinary level |
| ≤0.5 | ≤1.0 | ≤1.0 | ≤2.0 |
| Outer diameter of the coil mm | Number of joints allowed per roll (≤) | Joint spacing m | ||||||
| Thickness mm | ||||||||
| 0.004 0-0.0055 | >0.0055-10.009 0 | >0.0090-0.012 0 | >0.0120-0.020 0 | >0.020 0-0.040 0 | >0.040 0 | High precision level | Ordinary level | |
| ≤200 | 1 | 0 | 0 | 0 | 0 | 0 | - | ≥1 000 |
| ＞200-390 | 1 | 1 | 1 | 1 | ||||
| ＞390-450 | 3 | 2 | 1 | 1 | ||||
| ＞450-650 | 4 | 3 | 2 | 2 | 1 | ≥2000 | ≥1 000 | |
| ＞650 | 5 | 4 | 3 | 3 | ||||
