GNEE manufactures 6061 aluminum plates using an aluminum-silicon-magnesium alloy that has been reinforced by precipitation hardening. This alloy is medium strength, formable, weldable, machinable, and corrosion resistant.
6061 aluminum plate offers medium strength, formability, weldability, machinability, and corrosion resistance, making it popular for flooring, ramps, and steps due to its toughness and high corrosion resistance.
Aluminum Plate 6061 T6 temper has an ultimate tensile strength of 42,000 psi (290 MPa) and a yield strength of 35,000 psi (241 MPa). Elongation is 8% or greater in thicknesses of 0.250 inch (6.35 mm) or less and 10% in thicker portions. T651 temper has comparable mechanical characteristics.
Alloy 6061 aluminum plate has a relatively high strength, is easily welded, and is widely utilized not only in bicycle frames but also in construction, aircraft, and shipbuilding.
The main alloying elements in 6061 aluminum plate are magnesium and silicon, which provide moderate strength, good corrosion resistance, weldability, and an oxidation effect. Widely utilized in industrial buildings that require high strength and antibiotic corrosion resistance.
The main chemical components are copper (0.15-0.4%), silicon (0.4-0.8%), iron (0.7%), manganese (0.15%), magnesium (0.8-1.2%), zinc (0.25%), chromium (0.04-0.35%), and titanium (0.15%).
The difference between 6061 aluminum plate T6 and T651 is that under normal conditions, T6 has a relatively high internal stress and will deform during processing. The best state for processing is T651, which is stretched on the basis of T6 and eliminates internal stress.
6061-T6: cooling after solution heat treatment to provide high strength, without cold working;
6061-T651: Cooling after solution heat treatment to obtain high strength, followed by cold stretching by a stretching machine to remove residual internal stress after heat treatment, ensuring the precision of machined products without deformation after deep processing.
6061 T6 Aluminum Plate is a widely used aluminum alloy. Unless otherwise specified, it is often in the 6061 T6 range, with 6061 T651 being the best feature of the 6-series aluminum alloy and a fighter in the 6000-series aluminum alloy. It has great processing, welding, and electroplating properties; good corrosion resistance; high toughness; no deformation after processing; dense material with no flaws; easy polishing, coloring, and film production; and an outstanding oxidation effect.
Since 6061-T651 is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process, although its strength cannot be compared with the 2XXX series or the 7XXX series, it has many characteristics of magnesium and silicon alloys, excellent processing performance, excellent welding features and electroplating, good corrosion resistance, high toughness and no deformation after processing, compact material without defects, and is easy to polish and easy to color. 6061-T651 is commonly used in aircraft fixtures, electrical fixtures, and communication areas, as well as automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carriers, and other applications.
The states of 6061 aluminum plates include O temper, T4, T6, T651, and so on. various states have various application fields. 6061 aluminum plate has high strength, good anti-corrosion and anti-oxidation properties, and is widely used in automatic mechanical components, precision machining, vehicle chassis, cake molds, and other applications. It is also popular among consumers.
Both the 6061-T6 and the 6061-T651 aluminum plates are widely utilized. The distinction between the T6 condition of the 6061 aluminum plate and the T651 is:
T6 has a high internal pressure and is better suited to processing. The state is T651, which removes internal stress by T6 extension. The major alloy constituents of 6061 aluminum plate are magnesium and silicon, which offer medium to high strength, weldability, and an excellent oxidation effect.

| Aluminium sheet/Aluminium plate | |||||
| Aluminium Alloy | Thickness (mm) | Width (mm) | Length (mm) | Temper | |
| A1050, A1050, A1070, A1100 | 0.15-200 | 20-2620 | 20-8000 | O, H12, H14, H16, H18, H22, H24, H26 | |
| A3003, A3004, A3105 | 0.15-200 | 20-2620 | 20-8000 | O, H12, H14, H16, H18, H22, H24, H26 | |
| A5052, A5005, A5083, A5754 | 0.15-200 | 20-2620 | 20-8000 | O, H12, H14, H34, H32, H36, H111, H112 | |
| A6061, A6082, A6063 | 0.15-200 | 20-2620 | 20-8000 | T4, T6, T651 | |
| A8011 | 0.15-200 | 20-2620 | 20-8000 | O, H12, H14, H16, H18, H22, H24, H26 | |
| Standard Width | 914 mm, 1000 mm, 1220 mm, 1250 mm, 1500 mm | ||||
| Material process | CC AND DC | ||||
| Customize size | Size can be produced as per the client's requirement. | ||||
| Surface | Mill finish ,Bright Polish,Anodizing | ||||
| Brush, Perforated, Tread plate , etc. | |||||
| Quality Standard | ASTM B209, B209, B209, EN573-1 | ||||
| Payment Terms | TT OR LC OR DP at sight | ||||
| Delivery time | Within 25 days after receipt the lc or deposit | ||||
| Material Quality | Tension levelled ,flat ,Free of defects like oil stain,Roll Marks,Waves,Dents | ||||
| scratches, etc., A+++ quality, production process passed sgs and bv inspection | |||||
| Application | Construction, Building, Decoration, Curtain Wall, Roofing, Mould, Lighting, | ||||
| curtain wall, ship building,Aircraft,Oil Tank ,Truck Body etc | |||||
| Packing | Standard export-worthy wooden pallets, and standard packing is about 2 tons/pallet | ||||
| Pallet weight also can be as per client's requirement | |||||








