Aluminum 5052 H32 is a high-strength, non-heat-treatable alloy that offers excellent corrosion resistance, good weldability, and formability. The H32 temper designation signifies that the material has been strain hardened and stabilized, resulting in improved strength and workability.
Specifications of 5052 aluminum sheet strip and foil
| Dimensions of aluminum closures rolled | |||
| Parameter | Range | Standard | Tolerance |
| Thickness (mm) | 0.18 - 0.25 | 0.18, 0.20 | +0.005/-0.005 |
| Width (mm) | 50 - 1250 | 813, 845, 833.8, 835 | +0.5, -0 |
| Length (mm) | 400 - 1000 | 655,706 | +0.5, -0 |
| Diagonal difference for sheet (mm) | 1 max | - | - |
| Coil sizes (mm) | OD: 1450 max ID: 75,150,300, 508 | - | - |
| Coil density (kg/mm) | 3.5 max | - | - |
| Offer for thickness and width outside the range may be quoted on specific request | |||
| Surface | Mill finish, color coated, chromated, varnished | ||
| Earring | Typical value: < 2 percent for >= 0.18 mm thickness | ||
Product features of GNEE 5052 aluminum foil
Ring Pull stock often uses 5182 aluminum alloy processing, while Ring Pull Can Lids typically utilize 5052 and 5182 aluminum alloy processing.
Flexible stamping deformation is not easily cracked.
Small density, low weight, smooth surface, feels wonderful.
Environmental protection is simple: recycle and reuse.
Aluminum circle discs – High-quality, in-stock, and ready to ship. Ideal for deep drawing, spinning, cookware, andlighting.
Thickness 0.3–4mm, diameter 3.94–38.5". Smooth surface, no oil or scratches. Custom sizes and alloys (1060, 1070,3003, 5052) available.
Quality Assurance of GNEE 5052 aluminum sheet foil
Surface processing is good; there are no black marks, tire tracks, corrosion, pressure folds, creases, straightening roller printing, oil stain, stick injuries, scratches, metal and non-metal pressed into, etc. obvious defects; the strip flatness degree is greater than 10I (or wave height is less than or equal to 3 mm, wavelength is preferably more than 400mm).
Strict regulation of acceptable width tolerance: Thickness tolerance is +0.01mm (ideally 0.005mm). Width tolerance: +1mm. Flatness requirements: height less than 3mm, and wave number less than 3 within 1 meter.
Control sheet shape with roll, bending roll, and spray to provide good flatness, hot machine convex degree control within 0.1-0.8%, and hot online visual without visible wave.
Appearance quality:No end edge crack, roll end neat, no staggered pyramid.
Earring of 5052 aluminum sheet strip and foil
| Temper | Earring |
| H18, H19 | ≤4% |
Unevenness of 5052 aluminum sheet strip and foil
| Thickness mm | Longitudinal unevenness | Horizontal unevenness | ||
| Wave height mm | Wave per meter length | Wave height mm | Wave height mm | |
| not more than | ||||
| 0.150-0.250 | 2.0 | 4 | 1.5 | 2 |
| >0.250-0.500 | 3.0 | 3 | 1.5 | 2 |
Mechanical properties of 5052 aluminum sheet strip and foil
| Temper | Thickness mm | Mechanical properties | |
| Tensile strength MPa | Elongation % | ||
| Not less than | |||
| H18 | 0.200-0.500 | 280-320 | 3 |
| H19 | ≥285 | 2 | |
Camber and layering of 5052 aluminum sheet strip and foil
Layering of strip and foil≤1.0 mm, Camber≤5.0 mm.
Thickness tolerance of 5052 aluminum sheet strip and foil
| Thickness mm | Thickness tolerance mm |
| 0.150-0.250 | ±0.005 |
| >0.250-0.500 | ±0.010 |
Width tolerance of 5052 aluminum sheet strip and foil
| Width mm | Width tolerance mm |
| ≤800.0 | +0.5 0 |
| >800.0 | +1 0 |
Chemical composition of 5052 aluminum sheet strip and foil
| Element | Content (%) |
| Aluminum, Al | Remainder |
| Magnesium, Mg | 2.2-2.8 |
| Chromium, Cr | 0.15-0.35 |
| Silicon, Si | ≤0.25 |
| Iron, Fe | ≤0.40 |
| Copper, Cu | ≤0.10 |
| Manganese, Mn | ≤0.10 |
| Zinc, Zn | ≤0.10 |
What is 5052 H32 aluminum used for?
Aluminum 5052-H32 is commonly used for fuel tanks, automotive parts, and marine applications. 6061-T6 is commonly used in applications (such as aircraft structures) where a high strength-to-weight ratio is crucial. Bayou Metal Supply & Manufacturing offers a wide variety of aluminum products.
What is the difference between 6061 and 5052 H32 aluminum?
5052-H32 offers better formability without the risk of cracking during fabrication, making it an ideal choice for parts requiring tight radii or extensive forming. Additionally, its cost-effectiveness at approximately $2 less per pound than 6061 aluminum adds to its appeal for fabricated parts.
What is the difference between 5052 O and 5052-H32?
Aluminum 5052-H32 is strong due to its special mix and treatment. The H32 label means it is made stronger using strain hardening. It is also softened a bit through annealing. This process makes it stronger than the annealed type, known as 5052-O, while still allowing some flexibility.
What is 5052-H32 equivalent to?
5052-H32 is one of the strongest heat-treatable sheet metals. It is relatively easier to bend and form. It has excellent weldability and high fatigue strength and is more elastic than 6061-T6. The tensile strength of this aluminum alloy is 33,000 psi, and its yield strength is 28,000 psi.
Is 5052 aluminum more expensive than 6061?
5052 is generally less expensive than 6061. In summary, certain aluminum alloys (especially 5052-H32) are excellent materials for NEMA rated electrical enclosures – especially if your enclosure is going to be used outdoors and/or heat dissipation is a consideration.
What is the bend radius of 5052-H32 aluminum?
Aluminium Alloy 5052 is capable of being bent cold through an angle of 90 degrees around a pin having a radius equal to 1.5 times the thickness (t) of the sheet without cracking.
Is 5005 h34 better than 5052-H32?
5052 is stronger than 5005 and is used in applications requiring more structural integrity or impact resistance. 5052 has excellent corrosion resistance, medium static strength, medium to high fatigue strength, good weldability and very good corrosion resistance especially in marine applications.
