Foil is the material of choice for food packing containers due to its superior barrier performance, processing performance, and corrosion resistance. High-quality aluminum foils, including 3003, 3104, 8011, 8079, 8006, 1235, 5005, 5052, and 1100, are produced by GNEE and used as raw materials for food containers and lunch boxes.
The quality of aluminum foil satisfies the FDA, SGS, and other quality standards for food and pharmaceuticals as well as the manufacturing standards for aluminum goods, including ASTM B209, EN573-1, EN 546, ISO 209-1, GB/T 3198, GB/T 3190, and GB/T 3880.1-2006.
Specification of GNEE aluminum container foil
| Alloy | 3003, 3004, 8011, 8079, 8006, 5005, 5052, 1100, 1235 |
| Temper | O H14 H16 H22 H24 H26 |
| Thickness and deviation | 0.03-0.2mm (+/-8%) |
| Width and deviation | 100-2000mm (+/-1mm) |
| Inner diameter of the coil | 405/505/508/605mm |
| Quality requirement | For high precision aluminum foil: staggered layer ≤0.5, tower shape ≤1.0, pinhole diameter ≤0.1 Click to view the specific production quality [Deviation Data Table] |
| Surface treatment | Lubricant, color coated, emboss, etc. |
| Packaging | 1) Plastic film＋corrugated paper＋non fumigation wooden tray＋plastic tape. 2) Plastic film＋non fumigation plywood box＋plastic tape. 3) Special packaging requirements are available. |
Hot selling products of GNEE aluminum foil for container
Lubricant aluminum foil for container
Alloy: 3003 8011 8006 1100
helps keep food from sticking and preserve its quality by lowering the friction and adherence of foil when it comes into touch with food or drinks.
Lubricant dosages range from 20 mg to 300 mg/m2. There are two types of lubrication: single-sided and double-sided.
Non-Lubricant aluminum foil for container
Alloy:3003 8011 3004 5052 3005
There is no lubricating oil coating on the surface of non-lubricant aluminum foil. used to make containers for food and drink or for particular kinds of containers without the requirement for oiling to lessen adhesion. This could include containers that don't come into close touch with food or packaging designed for certain uses.
Color coated aluminum foil for container
Alloy: 8011 8006 3003 3105 6061
The coating is composed of food-grade polyester or epoxy resin (FDA and TUV), which can tolerate steam at 300 degrees Celsius for 30 minutes. One surface color paint is printable, and the other is a transparent protective paint or other PP film.
Ideal for food containers and lids for restaurants and homes, desserts, pet food containers, and airplanes.
Product features of GNEE aluminum foil for food container
High-quality aluminum foils, including 3003, 3104, 8011, 8079, 8006, 1235, 5005, 5052, and 1100, are produced by GNEE and used as raw materials for food containers and lunch boxes.
Aluminum foil is smooth, clean, and uniformly colored; it also performs well when uncoiling and adheres to specifications;
No coil group, spots, pinholes, white rust, oil stains, rolling marks, edge damage, bending, dents, scratches, etc.;
superior shading, moisture resistance, and barrier power;
outstanding mechanical performance, optimum durability, and processing flexibility;
capable of resisting heat conduction, strong temperature swings, and high and low temperatures;
There is widespread usage of composite, printing, and coating materials for packaging;
safe, hygienic, odorless, and nontoxic;
| Element | Chemical composition (%) | ||||||||
| 3003 | 3004 | 8011 | 8006 | 8079 | 5005 | 5052 | 1100 | 1235 | |
| Al | 98.6 | 98.0 | 99.0 | 98.0 | 99.0 | 99.0 | 95.8 | 99.0 | 99.0 |
| Si | 0.12 | 0.30 | 0.6 | 0.4 | 0.05 | 0.23 | 0.25 | 0.95 | 0.65 |
| Fe | 0.7 | 0.7 | 0.7 | 0.5 | 0.12 | 0.35 | 0.4 | 0.6 | 0.05 |
| Cu | 0.05 | 0.25 | 0.1 | 0.1 | 0.05 | 0.1 | 0.1 | 0.05 | 0.05 |
| Mn | 1.0 | 1.3 | 1.0 | 1.0 | 0.05 | 0.2 | 0.1 | - | - |
| Mg | - | - | - | - | - | - | 2.2 | - | - |
| Cr | - | - | - | - | - | - | 0.15 | - | - |
| Zn | 0.1 | 0.25 | 0.1 | 0.1 | 0.05 | 0.1 | 0.1 | 0.1 | 0.05 |
| Ti | - | - | - | - | - | - | - | - | - |
| Mechanical properties of GNEE hot selling container aluminum foil | ||||
| Alloy | Temper | Tensile strength Rm/MPa | Elongation A50mm(%)≥ | Elongation A100mm(%)≥ |
| 3003 | O | 80-135 | - | - |
| H12 H22 | 110-160 | 10.0 | 3.0 | |
| H14 H24 | 140-190 | 1.0 | ||
| H16 H26 | ≥170 | 1.0 | ||
| 3004 | H19 | ≥280 | - | - |
| 8011 8079 | O | 50-120 | 15 | 4 |
| H22 | 90-150 | 6 | 2.0 | |
| H14 H24 | 120-170 | 5 | - | |
| H26 | 140-190 | 2 | - | |
| 8006 | O | 110-140 | 20 | - |
| H22 H24 | 120-150 | 20 | - | |
| H26 | 130-160 | 12 | - | |
| 5005 | O | 100-140 | - | - |
| 5052 | O | 175-225 | 4 | - |
| H14 H24 | 250-300 | - | - | |
| H16 H26 | ≥270 | - | - | |
| 1100 1235 | O | 45-115 | 15 | 2.0 |
| H22 | 90-135 | 6 | 3 | |
| H14 H24 | 110-160 | 6 | 2 | |
| H16 H26 | 125-180 | 2 | 1 | |
.selectTdClass{background-color:#edf5fa !important}table.noBorderTable td,table.noBorderTable th,table.noBorderTable caption{border:1px dashed #ddd !important}table{margin-bottom:10px;border-collapse:collapse;display:table;}td,th{padding: 5px 10px;border: 1px dashed #DDD;}caption{border:1px dashed #DDD;border-bottom:0;padding:3px;text-align:center;}th{border-top:1px dashed #BBB;background-color:#F7F7F7;}table tr.firstRow th{border-top-width:2px;}.ue-table-interlace-color-single{ background-color: #fcfcfc; } .ue-table-interlace-color-double{ background-color: #f7faff; }td p{margin:0;padding:0;}
| Thickness (mm) | Number of pinholes (not greater than)(≤) | Pinhole diameter mm(≤) | |||||||
| Within any 1 m2 | Any 4 mm×4 mm or 1 mm×16 mm | ||||||||
| Ultra-high precision level | High precision level | Ordinary level | Ultra-high precision level | High precision level | Ordinary level | Ultra-high precision level | High precision level | Ordinary level | |
| 0.004 0-＜0.006 0 | Specific thickness according to customer requirements | 6 | 7 | 8 | 0.1 | 0.2 | 0.3 | ||
| 0.0060 | 500 | 1000 | l 500 | ||||||
| ＞0.0060-0.0065 | 400 | 600 | l 000 | ||||||
| ＞0.0065-0.0070 | 150 | 300 | 500 | ||||||
| ＞0.0070-0.0090 | 100 | 150 | 200 | ||||||
| ＞0.0090-0.0120 | 20 | 50 | 100 | ||||||
| ＞0.0120-0.0180 | 10 | 30 | 50 | 3 | |||||
| ＞0.0180-0.0200 | 3 | 20 | 30 | ||||||
| ＞0.0200-0.0400 | 0 | 5 | 10 | ||||||
| ＞0.0400 | 0 | 0 | 0 | 0 | |||||
| Adhesion | ||
| Thickness mm | Width mm | Peel-off length m |
| ≤0.1000 | ≤1000.0 | ≤1.0 |
| ＞1000.0 | ≤1.5 | |
| Staggered layer and tower shape | |||
| Staggered layer | Tower shape | ||
| High precision level | Ordinary level | High precision level | Ordinary level |
| ≤0.5 | ≤1.0 | ≤1.0 | ≤2.0 |
| Outer diameter of the coil mm | Number of joints allowed per roll (≤) | Joint spacing m | ||||||
| Thickness mm | ||||||||
| 0.004 0-0.0055 | >0.0055-10.009 0 | >0.0090-0.012 0 | >0.0120-0.020 0 | >0.020 0-0.040 0 | >0.040 0 | High precision level | Ordinary level | |
| ≤200 | 1 | 0 | 0 | 0 | 0 | 0 | - | ≥1 000 |
| ＞200-390 | 1 | 1 | 1 | 1 | ||||
| ＞390-450 | 3 | 2 | 1 | 1 | ||||
| ＞450-650 | 4 | 3 | 2 | 2 | 1 | ≥2000 | ≥1 000 | |
